How exactly to Reset the Oil Change Light in a Car

How exactly to Reset the Oil Change Light in a Car

Blog Article

Has got the "Maintenance" or "Oil Change" indicator light appeared on your automobile? Learn what it means and ways to get it to show off.

Modern vehicles are designed with several indicator lights to owners when something needs attention, and the oil change light (also called the maintenance light) is among them. This light is made to tell you when the engine oil needs changing, on the basis of the car's odometer reading. The oil change light won't turn fully off alone, even when the old oil has been drained and fresh oil added. That's where resetting the oil change light comes in.

Not all vehicles have a gas change light, but when yours does, resetting it's worth doing, and not only because of the annoyance of seeing the light on constantly. Unless the light is reset, your automobile may have no way of letting you know the next time a gas change is needed.

Here I'll be demonstrating the reset on a 2003 Toyota 4Runner, and although the actual steps vary from make to produce, the fundamental procedure is similar. Some makes and models have different procedures, like late-model Dodges, which require three quick presses of the gas pedal to reset. In the event that you try the procedure shown here and your light doesn't reset, look at your owner's manual, or check online for help relating to your particular vehicle.

Find the Reset Button and Turn On Vehicle System

Search your vehicle's gauge and dashboard area for a switch, switch or stick the says "Reset."
Turn the ignition to the ON position which means that your gauges and electronics light up, but don't start the engine.

Set Odometer to Display Mileage

Cycle through the various odometer modes until it shows total mileage driven.
Turn the ignition OFF.
Hold the Reset Button and Turn the Key

Press and hold the reset button.
Turn the ignition back to the ON position while holding the reset button.
Watch the oil change or maintenance light carefully. It will start to blink.
Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

Start the Vehicle

Start the engine and make the sure the oil change or maintenance light is now OFF.
If it's still ON, repeat the reset procedure.
If the dashboard light remains ON after two tries, refer to your owner's manual or the car manufacturer's site to learn more about the process for the vehicle.

visit here to get more information about check engine light.

Report this page